Chemistry/Petrochemistry

To support your selection of a suitable priming system for your application please find below a guidance.
Please note that this is only a guide. A recommendation always depends on the specific application.

All products:

Chemistry/Petrochemistry

Canister cleaning and filling station

JFS

A jerrycan filling station for the cleaning and filling of 21 20-liter palletized fuel jerrycans simultaneously.

Chemically aggressive media

AELK

Automatic aspirator for evacuation of centrifugal pumps. Special design for chemical aggressive pumping media.

Other

FVP-D

Diesel driven vacuum pump for evacuation of centrifugal pumps and siphon pipes.

FVP-F-G

Vacuum pump to exhaust gas, air and steam. Pump free of flat clearance surfaces, extensive insensitive to solid components of the service liquid. By this the pump is specially suited for priming units of pumping plants equipped with centrifugal pumps. By means of the self-controlled outlet valve the pump is automatically adjusted to variable pressure conditions.

FVP-KE

Evacuation of centrifugal pumps with diesel driven engine and electrical battery starters, suitable for clean or slightly contam- inated media.

FVP-R

Evacuation of centrifugal pumps with diesel driven engine, suitable for clean or slightly contaminated media.

FVP-S

Liquid ring vacuum pump with service liquid circulating tank for evacuation of unloading pumps on tankers. Special design for installation in explosive area.

ASVA/B

Level controlled priming systems for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Due to the level-control, the system is also suitable for plants where gas- or air inclusions have to be separated effectively even during operation of the centrifugal pump.

ASVS/T

Autoseparator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. The system is specially used in case of heavily gassing media (e.g. gasoline), media having considerable air and gas inclusions, as well as for evacuation of suction lines with relative peak points.

SSV

Fully automatic level-controlled compact priming system for the evacuation of single or several centrifugal pumps, especially in pump stations for the pumping of heavily contaminated pump- ing media such as e.g. untreated sewages, sludge, sinter water a.s.o.. Also used for the evacuation of siphon pipes.

TSV

Fully automatic level-controlled compact priming system for the evacuation of single or several centrifugal pumps, especially in pump stations for the pumping of heavily contaminated pumping media such as e.g. untreated sewages, sludge, sinter water a.s.o.. Also used for the evacuation of siphon pipes.

SSV-KE

Level controlled priming systems for evacuation of centrifugal pumps diesel engine motors and electric battery charging equipment, suitable for use in plants pumping sets or dredging pumps, sewage pumps emergency pumps, irrigation pumps, ...

TDES

Pressure controlled central vacuum unit for permanent evacuation of centrifugal pumps for the delivery of clean or slightly contaminated fluid. The pressure control enables the unit to be connected with pumps, working under different suction conditions.

TDV

Fully automatic central vacuum unit, pressure controlled designed for permanent evacuation of several centrifugal pumps or siphon pipes handling clean to slightly contaminated liquids. The pressure control enables systems with different suction levels to be connected. Each suction point is linked to the vacuum collection line via gas discharge valves.

TLES

Fully automatic level-controlled compact priming system for the evacuation of single or several centrifugal pumps, especially in pump stations for the pumping of heavily contaminated pumping media such as e.g. untreated sewages, sludge, sinter water a.s.o.. Also used for the evacuation of siphon pipes.

TNWK

Fully automatic central vacuum unit designed for level-controlled, permanent evacuation of several centrifugal pump units handling clean to lightly contaminated seawater. It is essential that the centrifugal pumps have to be evacuated operate on the same suction level.

TNWS

Fully automatic central vacuum unit designed for level-controlled, permanent evacuation of several centrifugal pump units handling clean to lightly contaminated liquids. It is essential that the centrifugal pumps have to be evacuated operate on the same suction level.

AELC-EX

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Improved re-evacuation after break of pump delivery during pump operation due to separate installation in front of the centrifugal pump.

AELC-Q

Automatic aspirator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Special design for service in explosive area.

AELD-EX

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Re-evacuation after break of pump delivery during pump operation.

AELE-EX

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Re- evacuation after break of pump delivery during pump operation.

AELG

Level controlled automatic priming unit for pre- and re-evacuation of individual or several centrifugal pumps.

AELG-EX

Level controlled priming unit for effective pre- and re-evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Effective re-evacuation due to separate installation in front of the centrifugal pump and level controlled evacuation independent from pump discharge pressure.

AELG-S

Level controlled automatic priming unit for pre- and re-evacuation of individual or several centrifugal pumps.

AELG-S-EX

Level controlled priming unit for effective pre- and re-evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre- evacuation is completed. Effective re-evacuation due to separate installation in front of the centrifugal pump and level controlled evacuation independent from pump discharge pressure.

AELH

Autoseparator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. The system is specially used in case of heavily gasing media, media having considerable air and gas inclusions, as well as for evacuation of suction lines with relative peak points.

AELZ

Fully automatic central vacuum unit, pressure controlled, designed for permanent evacuation of several centrifugal pumps handling clean to slightly contaminated liquids. The pressure control enables systems with different suction levels to be connected.

ALES

Fully automatic central vacuum unit designed for level- controlled, permanent evacuation of several centrifugal pump units handling clean to lightly contaminated liquids. It is essen- tial that the centrifugal pumps have to operate on the same suction level.

FCP

For the draining of free-flowing surface scum from the surface of basins, suction chambers of pumps etc.

GVP

Gully-Drainer for automatically-controlled collecting of dangerous fluids from the street surface and to close the sewerage system in case of disaster with tank trucks etc.

SCP

Drainer system for ground water sanitation; fully automatic skimming of floating pollutants (oil, etc) practically free from phase shift, out of ground water.

GLA

Automatic discharge of air or gas from centrifugal pumps and suction systems to a central vacuum unit, e.g. vatec-Type TDV, TDES or AELZ.

SPE/SPQ

Separator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. The system is specially used in case of heavily gassing media (e.g. gasoline), media having considerable air and gas inclusions, as well as for evacuation of suction lines with relative peak points.

GSPA/B/C

Automatic shut-off valve for pipelines to prevent gas flow.

SDS/SDF

Inlet nozzle for pump suction pipes.

DKH

Throttle valve for installation at the discharge side of centrifu- gal pumps serves for reducing the unloading process and to ensure higher purification in pump systems with priming sys- tems. The throttling aids evacuation processes by hindering the formation of air vortices at suction inlets.

SEPD

Automatic stripping system for evacuation of unloading pumps on tankers. Discharge of high gas accumulation in the pumping media of the cargo pumps.

TSUS

Level-controlled vacuum system for evacuating unloading pumps for conveying highly gaseous media. The system is particularly suitable for unloading tankers.

Tank wagon unloading

ESKA-S

Automatically operated priming system for pre-evacuation and effective re-evacuation of pumps for unloading street or railway tank wagons. We recommend the ESKA-Z system when several tank wagons are to be unloaded simultaneously.

ESKA-Z

Automatically operated tank wagon unloading system for simultaneous unloading of more than one top drained tank wagon. This system enables a high degree of residual drainage out of the tank wagon. The choice of components depends on the level of chemical aggression and/or the amount of expected gassing from the pumped medium.

ESKU

Automatically operated tank wagon unloading system for simultaneous and complete discharge of one or more bottom drained tank wagons. Depending on installation of the complete system a calibrated flow rate measurement can be archived.

More fields of Application