Level controlled priming systems for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Due to the level-control, the system is also suitable for plants where gas- or air inclusions have to be separated effectively even during operation of the centrifugal pump.

Automatic aspirator designed for the priming of centrifugal pumps where dry running is not admissible.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Improved re-evacuation after break of pump delivery during pump operation due to separate installation in front of the centrifugal pump.

Automatic aspirator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Special design for service in explosive area.

Level controlled automatic priming unit for pre- and re-evacuation of individual or several centrifugal pumps.

Level controlled priming unit for effective pre- and re-evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Effective re-evacuation due to separate installation in front of the centrifugal pump and level controlled evacuation independent from pump discharge pressure.

Level controlled priming systems for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Due to the level-control, the system is also suitable for plants where gas- or air inclusions have to be separated effectively even during operation of the centrifugal pump.

Automatic aspirator designed for the priming of centrifugal pumps where dry running is not admissible.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Improved re-evacuation after break of pump delivery during pump operation due to separate installation in front of the centrifugal pump.

Automatic aspirator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Special design for service in explosive area.

Level controlled automatic priming unit for pre- and re-evacuation of individual or several centrifugal pumps.

Level controlled priming unit for effective pre- and re-evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Effective re-evacuation due to separate installation in front of the centrifugal pump and level controlled evacuation independent from pump discharge pressure.

Level controlled automatic priming unit for pre- and re-evacuation of individual or several centrifugal pumps.

Level controlled priming unit for effective pre- and re-evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre- evacuation is completed. Effective re-evacuation due to separate installation in front of the centrifugal pump and level controlled evacuation independent from pump discharge pressure.

Almost all products in the corresponding design can be adapted for this area of application. Please contact us in this regard.

Automatic aspirator for evacuation of centrifugal pumps. Special design for chemical aggressive pumping media.

Automatic aspirator designed for centrifugal pumps where dry running is admissible for short periods of time.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Re-evacuation after break of pump delivery during pump operation.

Automatic aspirator designed for the priming of centrifugal pumps where dry running is not admissible.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Re- evacuation after break of pump delivery during pump operation.

Automatic aspirator designed for centrifugal pumps where dry running is admissible for short periods of time.

Priming unit for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. The unit is designed for those centrifugal pumps, which mainly operate under intake pressure condition and where re-evacuation is only required to a very slight degree.

Priming unit for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids and where dry running is admissible for short periods of time.

Automatic aspirator designed for centrifugal pumps where dry running is admissible for short periods of time.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Re-evacuation after break of pump delivery during pump operation.

Automatic aspirator designed for the priming of centrifugal pumps where dry running is not admissible.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Re- evacuation after break of pump delivery during pump operation.

Automatic aspirator designed for centrifugal pumps where dry running is admissible for short periods of time.

Automatic aspirator designed for the priming of centrifugal pumps where dry running is not admissible.

Pressure controlled priming unit for evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre-evacuation is completed. Re- evacuation after break of pump delivery during pump operation.

Level controlled automatic priming unit for pre- and re-evacuation of individual or several centrifugal pumps.

Level controlled priming unit for effective pre- and re-evacuation of centrifugal pumps used in hazardous explosive area, e.g. on board ships. Pump start signal when pre- evacuation is completed. Effective re-evacuation due to separate installation in front of the centrifugal pump and level controlled evacuation independent from pump discharge pressure.

Vacuum pump to exhaust gas, air and steam. Pump free of flat clearance surfaces, extensive insensitive to solid components of the service liquid. By this the pump is specially suited for priming units of pumping plants equipped with centrifugal pumps. By means of the self-controlled outlet valve the pump is automatically adjusted to variable pressure conditions.

Liquid ring vacuum pump with service liquid circulating tank for evacuation of unloading pumps on tankers. Special design for installation in explosive area.

Manually operated vacuum compressed air ejector, e.g. for evacuation of e.g. centrifugal pumps.

Level controlled priming system with independent service liquid supply for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. Due to the level-control, the system is also suitable for plants where gas- or air inclu- sions have to be separated effectively even during operation of the centrifugal pump.

Autoseparator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. The system is specially used in case of heavily gassing media (e.g. gasoline), media having considerable air and gas inclusions, as well as for evacuation of suction lines with relative peak points.

Fully automatic level-controlled compact priming system for the evacuation of single or several centrifugal pumps, especially in pump stations for the pumping of heavily contaminated pump- ing media such as e.g. untreated sewages, sludge, sinter water a.s.o.. Also used for the evacuation of siphon pipes.

Fully automatic level-controlled compact priming system for the evacuation of single or several centrifugal pumps, especially in pump stations for the pumping of heavily contaminated pumping media such as e.g. untreated sewages, sludge, sinter water a.s.o.. Also used for the evacuation of siphon pipes.

Pressure controlled central vacuum unit for permanent evacuation of centrifugal pumps for the delivery of clean or slightly contaminated fluid. The pressure control enables the unit to be connected with pumps, working under different suction conditions.

Fully automatic central vacuum unit, pressure controlled designed for permanent evacuation of several centrifugal pumps or siphon pipes handling clean to slightly contaminated liquids. The pressure control enables systems with different suction levels to be connected. Each suction point is linked to the vacuum collection line via gas discharge valves.

Autoseparator for evacuation of centrifugal pumps pumping clean or slightly contaminated fluids. The system is specially used in case of heavily gasing media, media having considerable air and gas inclusions, as well as for evacuation of suction lines with relative peak points.

Automatic aspirator for evacuation of centrifugal pumps. Special design for chemical aggressive pumping media.

Fully automatic central vacuum unit, pressure controlled, designed for permanent evacuation of several centrifugal pumps handling clean to slightly contaminated liquids. The pressure control enables systems with different suction levels to be connected.

Fully automatic central vacuum unit designed for level- controlled, permanent evacuation of several centrifugal pump units handling clean to lightly contaminated liquids. It is essen- tial that the centrifugal pumps have to operate on the same suction level.

Drainage of small spaces, tank fields, etc.

Stripping system for chemicals and product tankers, large-size tanks etc. Drainage of flat bottoms where inclined pipes cannot be used.

Auxiliary bilge well unit for small machinery rooms with long distance to the main bilge system, e.g. rooms for bow thruster, steering gear, cargo hold, chain locker etc.

Pneumatically-operated drainage devices for horizontal pipeline systems, e.g. deck pipelines for tankers.

2-way gas discharge valve for automatically exhausting of liquid filled components of installations, so as high points of discharge pipes, boiler, filter tanks etc.

Self controlled combinated ball type non return and deaeration valve to exhaust air and gas from pipes and vessels under vacuum or pressure (max. 2 bar) conditions by means of a vacuum pump.

Automatic discharge of air or gas from centrifugal pumps and suction systems to a central vacuum unit, e.g. vatec-Type TDV, TDES or AELZ.

Automatic discharge of air or gas from centrifugal pumps and suction systems to a central vacuum unit, e.g. vatec-Type TDV, TDES or AELZ.

Inlet nozzle for pump suction pipes.

Throttle valve for installation at the discharge side of centrifu- gal pumps serves for reducing the unloading process and to ensure higher purification in pump systems with priming sys- tems. The throttling aids evacuation processes by hindering the formation of air vortices at suction inlets.

Non-Return Valve for clean to lightly contaminated liquids. Flow in arrow direction.

Protective strainer fur succeeding piping and pumps.

Float controlled level indicators, e.g. for use as starting signal for centrifugal pumps when evacuation is finished.

Pressure monitoring of liquid supply systems, etc. Dry-run protection and automatic shut-off device for centrifugal pumps For clean or slightly contaminated liquids. Nozzle connection.

Automatic-Ballast-Stripping-System to centrally evacuate ballast and bilge pumps for use in containers ships, bulk carriers, tankers, etc.

Automatic stripping system for evacuation of unloading pumps on tankers. Discharge of high gas accumulation in the pumping media of the cargo pumps.

Level-controlled vacuum system for evacuating unloading pumps for conveying highly gaseous media. The system is particularly suitable for unloading tankers.

Temperature control unit for H2 refuelling of submarines.

Level-controlled automatic priming unit for pre- and re- evacuation of single centrifugal pumps, e.g. on submarines.